Kestrel
대시보드로 돌아가기
CVE-2026-64191UNKNOWNMITRENVD대응게시일: 2026. 07. 20.수정일: 2026. 07. 20.CNA: 416baaa9-dc9f-4396-8d5f-8c081fb06d67Received

In the Linux kernel, the following vulnerability has been resolved: i2c: stub: Reject I2C block transfers with invalid length The I2C_SMBU

위협 신호 · CVSS · EPSS · KEV

정기 패치· 높은 악용 신호 없음
CVSS
unknown

이론적 심각도 점수

EPSS
0.2%상위 92.8%

30일 내 악용 확률 예측

KEV
미등재

실측 악용 기록 없음

권장 대응 기한60일 이내CISA SSVC 기준

계획된 패치 주기 내 조치(60일 이내)

외부 노출· KEV 미등재 · 자동화 어려움 · 부분 영향 · 외부 노출

CVSS 벡터 · 메트릭

CVSS 벡터 정보 없음

상세 설명

In the Linux kernel, the following vulnerability has been resolved:

i2c: stub: Reject I2C block transfers with invalid length

The I2C_SMBUS_I2C_BLOCK_DATA case in stub_xfer() uses data->block[0]
as the transfer length. The existing check only clamps it to avoid
overrunning the chip->words[256] register array, but does not validate
it against I2C_SMBUS_BLOCK_MAX (32), which is the limit of the union
i2c_smbus_data.block buffer (34 bytes total). The driver is a
development/test tool (CONFIG_I2C_STUB=m, not built by default)
that must be loaded with a chip_addr= parameter.

A local user with access to /dev/i2c-* can issue an I2C_SMBUS ioctl
with I2C_SMBUS_I2C_BLOCK_DATA and data->block[0] > 32, causing
stub_xfer() to read or write past the end of the union
i2c_smbus_data.block buffer:

BUG: KASAN: stack-out-of-bounds in stub_xfer (drivers/i2c/i2c-stub.c:223)
Read of size 1 at addr ffff88800abcfd92 by task exploit/81
Call Trace:
<TASK>
stub_xfer (drivers/i2c/i2c-stub.c:223)
__i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:593)
i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:536)
i2cdev_ioctl_smbus (drivers/i2c/i2c-dev.c:391)
i2cdev_ioctl (drivers/i2c/i2c-dev.c:478)
__x64_sys_ioctl (fs/ioctl.c:583)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>

The bug exists because i2c-stub implements .smbus_xfer directly,
bypassing the I2C_SMBUS_BLOCK_MAX validation in
i2c_smbus_xfer_emulated(). The I2C_SMBUS_BLOCK_DATA case in the same
function correctly validates against I2C_SMBUS_BLOCK_MAX, but the
I2C_SMBUS_I2C_BLOCK_DATA case does not.

Fix by rejecting transfers with data->block[0] == 0 or
data->block[0] > I2C_SMBUS_BLOCK_MAX with -EINVAL, consistent with
both the I2C_SMBUS_BLOCK_DATA case in the same function and the
I2C_SMBUS_I2C_BLOCK_DATA validation in i2c_smbus_xfer_emulated().

AI 심층 분석

공격 시나리오 · 재현 가능한 PoC 페이로드 · 즉시 적용 가능한 차단 패치를 한 번에 받아 보세요. 보안 운영팀이 그대로 점검·티켓팅에 쓸 수 있는 형태로 정리해 드립니다.