Kestrel
대시보드로 돌아가기
CVE-2026-93209UNKNOWNMITRENVD대응게시일: 2026. 09. 24.수정일: 2026. 09. 24.CNA: 416baaa9-dc9f-4396-8d5f-8c081fb06d67Received

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: use skb_get() instead of skb_clone() for req_skb

위협 신호 · CVSS · EPSS · KEV

정기 패치· 높은 악용 신호 없음
CVSS
—unknown

이론적 심각도 점수

EPSS
—

예측 데이터 없음

KEV
미등재

실측 악용 기록 없음

권장 대응 기한60일 이내CISA SSVC 기준

계획된 패치 주기 내 조치(60일 이내)

외부 노출· KEV 미등재 · 자동화 어려움 · 부분 영향 · 외부 노출

CVSS 벡터 · 메트릭

CVSS 벡터 정보 없음

상세 설명

In the Linux kernel, the following vulnerability has been resolved:

Bluetooth: hci_core: use skb_get() instead of skb_clone() for req_skb

BT enable fails intermittently with -ETIMEDOUT (-110). The kernel log
shows the HCI Read Local Version command was sent and the firmware
replied with status 0x00 (logged by hci_req_cmd_complete() BT_DBG),
but the waiter in __hci_cmd_sync_sk() never woke up and timed out
after 10 s:

bluetooth hci0: Opcode 0xfc00 // __hci_cmd_sync_sk
bluetooth hci0: opcode 0xfc00 plen 1 // hci_cmd_sync_add
bluetooth hci0: skb len 4 // hci_cmd_sync_alloc
bluetooth hci0: length 1 // hci_req_sync_run
Bluetooth: hci0 cmd_cnt 1 cmd queued 1 // hci_cmd_work
Bluetooth: hci0 type 1 len 4 // hci_send_frame
Bluetooth: opcode 0xfc00 status 0x00 // hci_req_cmd_complete
<-- req_skb NULL: req_complete_skb not set,
hci_cmd_sync_complete() never called,
req_status stays HCI_REQ_PEND -->
<-- 10 s later: wait_event_interruptible_timeout expires -->
bluetooth hci0: end: err -110 // __hci_cmd_sync_sk

The root cause is that hci_send_cmd_sync() clones the sent command
into hdev->req_skb so that hci_req_cmd_complete() can locate the
registered completion callback. Under memory pressure this
skb_clone() fails, leaving hdev->req_skb NULL. The firmware reply
is received and processed, but hci_req_cmd_complete() finds NULL
req_skb, so hci_cmd_sync_complete() is never called, req_status
stays HCI_REQ_PEND, and the waiter times out with -ETIMEDOUT.

req_skb is only used to read bt_cb(skb)->hci callbacks and opcode --
it is never modified. Replace skb_clone() with skb_get(), which
simply increments the reference count of hdev->sent_cmd without
allocating new memory and therefore cannot fail.

This issue was first observed as a use-after-free in ttyport_close()
when ttyport_open() failed, which was investigated in an earlier
patch series [1]. That investigation led to the discovery of the
true root cause described above.

[1] https://lore.kernel.org/all/20250430111617.1151390-1-quic_cxin@quicinc.com/

AI 심층 분석

공격 시나리오 · 재현 가능한 PoC 페이로드 · 즉시 적용 가능한 차단 패치를 한 번에 받아 보세요. 보안 운영팀이 그대로 점검·티켓팅에 쓸 수 있는 형태로 정리해 드립니다.